Two Chances to Get It Right — OnePlus 15 MagSafe Case with 2 Screen Protectors

Most cases include one screen protector. The Red Pepper Cases OnePlus 15 MagSafe Case with 2 Screen Protectors includes two — because the first installation doesn't always go perfectly, and a replacement protector shouldn't require a second purchase. Combined with 38 N52 MagSafe magnets, 10FT military-grade drop protection, and a dual-layer TPU-and-PC shell, this kit gives the OnePlus 15 complete front-and-back protection from the first day with a backup for whenever you need it.

2× 9H Tempered Glass Screen Protectors — Install One, Keep One

Two full-size 9H aluminosilicate tempered glass screen protectors are included. Both have alignment frames for bubble-free installation. The second protector serves as a spare for when the first is cracked in a drop, scratched over time, or simply installed imperfectly on the first attempt. Most competing kits include one protector — getting the second one means the total kit cost covers the cost of what would otherwise be a separate follow-up purchase.

38 N52 MagSafe Magnets — Full Ecosystem

Thirty-eight N52-grade magnets form a MagSafe-aligned ring inside the case back. The ring snaps securely to MagSafe car mounts, charging pads, wallet accessories, and ring stand grips. The magnetic retention force is rated at over 2,000 gf — sufficient to hold the phone against MagSafe car mounts during highway driving and sudden braking events. Qi wireless charging is fully supported.

10FT Military-Grade Drop Protection

The dual-layer construction — TPU frame with four corner airbag zones plus a rigid PC back — has been tested to MIL-STD-810H drop standards from 10 feet across all impact angles. Corner drops (statistically the most common real-world drop orientation) are handled by the airbag zones; flat-face drops are absorbed by the rigid PC back distributing force across its full area.

2.5 mm Camera Lip — Hasselblad Protection

The camera island is protected by a 2.5 mm raised lip around its perimeter. All three Hasselblad lenses, the LiDAR sensor, and the LED flash remain clear of hard surfaces at all times. The camera cutout is full-clearance — no case material intrudes on the optical path of any lens in any shooting mode.

1.5 mm Screen Lip — Passive Display Protection

The case edge rises 1.5 mm above the display surface, protecting the AMOLED screen on flat-surface contact without a screen protector. Combined with either of the included 9H protectors, the OnePlus 15's display has both mechanical lip protection and glass-layer scratch and impact resistance.

Matte Black Dual-Layer Finish

The case uses a matte black PC back with an anti-fingerprint coating and a black TPU frame. The matte surface diffuses fingerprint oils, reduces reflection in direct light, and provides micro-texture grip at the case back. The dual-layer construction adds minimal depth — total case addition is under 2.5 mm.

Anti-Yellowing Materials

Where clear or near-transparent elements are present, the TPU and PC materials are formulated with UV stabilizers. For the black matte version, yellowing is not applicable to the opaque materials — the black finish maintains color consistency under normal UV exposure without fading or discoloring.

Precise Cutouts — All Ports and Buttons

All cutouts follow the OnePlus 15's hardware map: USB-C port, speaker grille, SIM tray, microphone array, volume rocker, power button, and alert slider. Tactile button covers provide click response matching native OnePlus 15 buttons.

Wireless Charging Compatible

The dual-layer construction uses no metal in the wireless charging path. MagSafe and Qi wireless charging both pass through the case at full rated speed. No case removal is required for charging.

Specs at a Glance

Compatible Device: OnePlus 15 5G (2025), 6.78-inch AMOLED
Color: Black
Magnet Spec: 38 × N52, MagSafe-aligned
Screen Protectors: 2× 9H aluminosilicate tempered glass
Drop Rating: 10FT MIL-STD-810H
Camera Lip: 2.5 mm
Screen Lip: 1.5 mm
Wireless Charging: MagSafe + Qi compatible
Back Material: Matte PC
Frame: TPU, 4-corner airbag zones

Shop All Red Pepper Cases Phone Cases

5 Reasons Two Protectors Beat One

1. First Installation Backup: Even with an alignment frame, first-time screen protector installers sometimes get a bubble or alignment issue. The second protector means a clean do-over without a trip to the store.
2. Drop Replacement: When the screen protector takes a crack instead of the phone glass, you'll want to replace it. The second is ready in the box.
3. Long-Term Ownership: Over 2 years of device ownership, having a spare protector on hand means the phone always has fresh glass coverage when needed.
4. Sharing: Two protectors means you can give one to a friend or family member who gets the same phone.
5. Value: The cost of a single quality screen protector sold separately often exceeds the value difference between a one-protector and two-protector case bundle.

Feature vs. Benefit Table

Installation Guide

Step 1: Clean the screen with the included alcohol wipe. Allow 60 seconds to fully dry — any moisture under the protector causes hazing.
Step 2: Use the alignment frame to position the first screen protector over the display. Lower from one edge and press outward from center.
Step 3: If bubbles are present at edges, lift that corner within 30 seconds and repress. Store the second protector in its packaging for later use.
Step 4: Install the case starting from the USB-C corner, pressing corners in sequence until all four click.
Step 5: Test MagSafe snap and all button access before daily use.

Troubleshooting

Screen protector has persistent bubble at center: A small central bubble typically self-resolves in 24–48 hours as the adhesive cures. Do not attempt to lift and reapply from the center.
Second protector has a scratch from storage: If the packaging was compromised, the second protector may have minor surface marks. These are surface-level and do not affect optical clarity or hardness rating.
MagSafe charger not aligning: Remove any metal insert (bank card, wallet) from directly behind the phone — it can redirect the MagSafe field.
Case corner won't seat: Press the opposite corner firmly first — the geometry of dual-layer cases requires opposite corners to seat before the problematic corner can fully close.

Frequently Asked Questions

Q: Are both screen protectors identical?
A: Yes. Both are the same 9H aluminosilicate tempered glass with alignment frames — identical specification, identical installation process.

Q: Do both screen protectors work with the in-display fingerprint reader?
A: Yes. Both protectors are optically calibrated for the OnePlus 15's under-display fingerprint scanner.

Q: What happens to the second protector if I don't use it right away?
A: Store it in its original packaging in a cool, dry location. The adhesive remains active for 12+ months in original packaging.

Q: How many MagSafe magnets does this case have?
A: 38 N52-grade magnets in a MagSafe-aligned ring formation.

Q: Is the drop rating 10FT for the case with both protectors installed?
A: The MIL-STD-810H drop rating applies to the case. The screen protector adds independent glass-layer protection for the display — both contribute to overall protection.

Q: Can I replace a cracked screen protector with a third-party one?
A: Yes. The raised screen lip accommodates any standard flat tempered glass screen protector under 0.4 mm thick.

Q: Is this compatible with OnePlus 15 Pro?
A: No. Designed for the OnePlus 15 standard model (6.78-inch, 2025). The Pro has different dimensions and camera layout.

Q: Does wireless charging work through the screen protector?
A: Wireless charging coils are on the back of the phone — the front screen protector has no effect on wireless charging.

Q: Is the black finish matte or glossy?
A: Matte. The anti-fingerprint coating diffuses light and fingerprint oils for a clean look.

Q: What is the return policy?
A: 30-day returns. Contact us through our Contact Page.

Q: Does the case work with MagSafe wallets?
A: Yes. The 38 N52 ring snaps to MagSafe-standard wallet accessories on the back of the case.

Q: Is the screen protector pre-cut for the OnePlus 15 or universal?
A: Pre-cut precisely for the OnePlus 15's display dimensions and camera cutout positioning.

Q: How do I know which screen protector to install first?
A: Both are identical — install whichever is easier to access in the packaging. Keep the other sealed for later use.

Q: Does the case protect the alert slider?
A: Yes — there is a precision cutout for the alert slider with full access maintained.

Further reading:
Why You Should Always Have a Spare Screen Protector — Red Pepper Cases
How to Install a Screen Protector Perfectly Every Time — Red Pepper Cases